The GigaVUE-420 provides a cost effective solution to monitoring telecom and enterprise networks. Network Engineers who face the problems of multiple network segments to monitor, multiple tools to deploy, too few SPAN ports and TAPs can now easily solve all of these issues.
GigaVUE-420 base unit is available with 4 copper 10/100/1000 ports or four fiber optic SFP ports. Four optional 1G expansion or TAP module bays are available on the front panel and four 10G expansion or TAP module bays are available on the rear panel. When fully configured the GigaVUE-420 supports four 10G ports and twenty 1G ports plus stacking. Dual redundant load sharing 110/240V AC power supplies or dual redundant load sharing -48V DC power supplies are available.
Features
Intelligently filter packets at full line rate
Aggregation of primary and secondary links
Multicast packets from one SPAN or TAP to many tools
Load balance data streams
Benefits
Reduce time spent on troubleshooting
Keep tools plugged in while troubleshooting
Off-load switches and aggregate VLANS out-of-band
Share SPAN Ports
Applications
Isolate & capture sessions across parallel links and switches
Share scarce span ports between multiple tools
Reduce and customize data flow to each tool
Divide large loads across multiple tools
Monitor 10G links with legacy 1G or 10G tools
Aggregate multiple links simultaneously to multiple tools
GigaVUE-420 model numbers:
GSV-421: Four copper ports and two AC power supplies
GSV-422: Four fiber ports and two AC power supplies
GSV-423: Four copper ports and two DC power supplies
GSV-424: Four fiber ports and two DC power supplies
